Capture dirt and sediment at construction sites and other "High Erosion" areas with a rugged polypropylene guard which can be easily rinsed and reused
Drain-Net’s Ultra Drain Guard® removes sediment, pollutants, and other waste from storm water before it can become a problem in the water system. Made of rugged polypropylene, this model can be used multiple times. Ultra Drain Guard® helps you comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Storm Water Pollution Prevention Plans.
Rugged polypropylene construction can be easily rinsed and reused
Deep accumulation pocket (36") can hold up to 500 lbs. of soil, sand, sediment and dirt
Designed for easy removal with backhoe, forklift or other equipment
Custom sizes available
Compliance: Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDL requirements.
FAQ's:
Why would I choose the Reusable Drain Guard over another model? Because of its extraordinary capacity (up to 500 lbs), the Reusable Drain Guard is an excellent choice where the potential for sediment, sand, soil, and dirt is great and there is little or no concern for capturing hydrocarbons. For this reason, the Reusable Drain Guard is often used on construction sites.
Five hundred pounds is a lot of weight. Will the grate be able to hold the Drain Guard in place with that kind of load? This will be dependent from catch basin to catch basin depending on the design, weight, and size of the grate, the fit of the grate and other factors. However, it can and has been done. For added security, rebar can be inserted into the removal flap pockets and left in place (these will be necessary during removal of the Drain Guard).
What is the flow rate for this Drain Guard? When new, the flow rate for the Reusable Drain Guard is 695 gals/min/ft².
How am I supposed to remove the Reusable Drain Guard when it is full? Once rebar has been inserted into the removal flap pockets, the unit can either be removed by hand (at least two people) or, for larger loads, a backhoe, forklift or other equipment should be used.
Why doesn't this catch basin insert absorb oil and other hydrocarbons like your other Drain Guards? In order to be able to contain very large amounts of sand, silt, and sediment, it is necessary to use a polypropylene material to make the Reusable Model Drain Guard. While this is obviously a very strong, durable and heavy-duty material it does not have the oil-absorbing capabilities of the geotextile material that is used for most of our other Drain Guard models.
Regulations 40 CFR 122.26
Ultra-DrainGuard, Reusable Model (Curb Style) - 24" x 24"
Capture dirt and sediment at construction sites and other "High Erosion" areas with a rugged polypropylene guard which can be easily rinsed and reused
Drain-Net’s Ultra Drain Guard® removes sediment, pollutants, and other waste from storm water before it can become a problem in the water system. Made of rugged polypropylene, this model can be used multiple times. Ultra Drain Guard® helps you comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Storm Water Pollution Prevention Plans.
Rugged polypropylene construction can be easily rinsed and reused
Deep accumulation pocket (36") can hold up to 500 lbs. of soil, sand, sediment and dirt
Designed for easy removal with backhoe, forklift or other equipment
Custom sizes available
Compliance: Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDL requirements.
FAQ's:
Why would I choose the Reusable Drain Guard over another model? Because of its extraordinary capacity (up to 500 lbs), the Reusable Drain Guard is an excellent choice where the potential for sediment, sand, soil, and dirt is great and there is little or no concern for capturing hydrocarbons. For this reason, the Reusable Drain Guard is often used on construction sites.
Five hundred pounds is a lot of weight. Will the grate be able to hold the Drain Guard in place with that kind of load? This will be dependent from catch basin to catch basin depending on the design, weight, and size of the grate, the fit of the grate and other factors. However, it can and has been done. For added security, rebar can be inserted into the removal flap pockets and left in place (these will be necessary during removal of the Drain Guard).
What is the flow rate for this Drain Guard? When new, the flow rate for the Reusable Drain Guard is 695 gals/min/ft².
How am I supposed to remove the Reusable Drain Guard when it is full? Once rebar has been inserted into the removal flap pockets, the unit can either be removed by hand (at least two people) or, for larger loads, a backhoe, forklift or other equipment should be used.
Why doesn't this catch basin insert absorb oil and other hydrocarbons like your other Drain Guards? In order to be able to contain very large amounts of sand, silt, and sediment, it is necessary to use a polypropylene material to make the Reusable Model Drain Guard. While this is obviously a very strong, durable and heavy-duty material it does not have the oil-absorbing capabilities of the geotextile material that is used for most of our other Drain Guard models.
Capture dirt and sediment at construction sites and other "High Erosion" areas with a rugged polypropylene guard which can be easily rinsed and reused
Drain-Net’s Ultra Drain Guard® removes sediment, pollutants, and other waste from storm water before it can become a problem in the water system. Made of rugged polypropylene, this model can be used multiple times. Ultra Drain Guard® helps you comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Storm Water Pollution Prevention Plans.
Rugged polypropylene construction can be easily rinsed and reused
Deep accumulation pocket (36") can hold up to 500 lbs. of soil, sand, sediment and dirt
Designed for easy removal with backhoe, forklift or other equipment
Custom sizes available
Compliance: Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDL requirements.
FAQ's:
Why would I choose the Reusable Drain Guard over another model? Because of its extraordinary capacity (up to 500 lbs), the Reusable Drain Guard is an excellent choice where the potential for sediment, sand, soil, and dirt is great and there is little or no concern for capturing hydrocarbons. For this reason, the Reusable Drain Guard is often used on construction sites.
Five hundred pounds is a lot of weight. Will the grate be able to hold the Drain Guard in place with that kind of load? This will be dependent from catch basin to catch basin depending on the design, weight, and size of the grate, the fit of the grate and other factors. However, it can and has been done. For added security, rebar can be inserted into the removal flap pockets and left in place (these will be necessary during removal of the Drain Guard).
What is the flow rate for this Drain Guard? When new, the flow rate for the Reusable Drain Guard is 695 gals/min/ft².
How am I supposed to remove the Reusable Drain Guard when it is full? Once rebar has been inserted into the removal flap pockets, the unit can either be removed by hand (at least two people) or, for larger loads, a backhoe, forklift or other equipment should be used.
Why doesn't this catch basin insert absorb oil and other hydrocarbons like your other Drain Guards? In order to be able to contain very large amounts of sand, silt, and sediment, it is necessary to use a polypropylene material to make the Reusable Model Drain Guard. While this is obviously a very strong, durable and heavy-duty material it does not have the oil-absorbing capabilities of the geotextile material that is used for most of our other Drain Guard models.
Capture dirt and sediment at construction sites and other "High Erosion" areas with a rugged polypropylene guard which can be easily rinsed and reused
Drain-Net’s Ultra Drain Guard® removes sediment, pollutants, and other waste from storm water before it can become a problem in the water system. Made of rugged polypropylene, this model can be used multiple times. Ultra Drain Guard® helps you comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Storm Water Pollution Prevention Plans.
Rugged polypropylene construction can be easily rinsed and reused
Deep accumulation pocket (36") can hold up to 500 lbs. of soil, sand, sediment and dirt
Designed for easy removal with backhoe, forklift or other equipment
Custom sizes available
Compliance: Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDL requirements.
FAQ's:
Why would I choose the Reusable Drain Guard over another model? Because of its extraordinary capacity (up to 500 lbs), the Reusable Drain Guard is an excellent choice where the potential for sediment, sand, soil, and dirt is great and there is little or no concern for capturing hydrocarbons. For this reason, the Reusable Drain Guard is often used on construction sites.
Five hundred pounds is a lot of weight. Will the grate be able to hold the Drain Guard in place with that kind of load? This will be dependent from catch basin to catch basin depending on the design, weight, and size of the grate, the fit of the grate and other factors. However, it can and has been done. For added security, rebar can be inserted into the removal flap pockets and left in place (these will be necessary during removal of the Drain Guard).
What is the flow rate for this Drain Guard? When new, the flow rate for the Reusable Drain Guard is 695 gals/min/ft².
How am I supposed to remove the Reusable Drain Guard when it is full? Once rebar has been inserted into the removal flap pockets, the unit can either be removed by hand (at least two people) or, for larger loads, a backhoe, forklift or other equipment should be used.
Why doesn't this catch basin insert absorb oil and other hydrocarbons like your other Drain Guards? In order to be able to contain very large amounts of sand, silt, and sediment, it is necessary to use a polypropylene material to make the Reusable Model Drain Guard. While this is obviously a very strong, durable and heavy-duty material it does not have the oil-absorbing capabilities of the geotextile material that is used for most of our other Drain Guard models.
Capture dirt and sediment at construction sites and other "High Erosion" areas with a rugged polypropylene guard which can be easily rinsed and reused
Drain-Net’s Ultra Drain Guard® removes sediment, pollutants, and other waste from storm water before it can become a problem in the water system. Made of rugged polypropylene, this model can be used multiple times. Ultra Drain Guard® helps you comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Storm Water Pollution Prevention Plans.
Rugged polypropylene construction can be easily rinsed and reused
Deep accumulation pocket (36") can hold up to 500 lbs. of soil, sand, sediment and dirt
Designed for easy removal with backhoe, forklift or other equipment
Custom sizes available
Compliance: Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDL requirements.
FAQ's:
Why would I choose the Reusable Drain Guard over another model? Because of its extraordinary capacity (up to 500 lbs), the Reusable Drain Guard is an excellent choice where the potential for sediment, sand, soil, and dirt is great and there is little or no concern for capturing hydrocarbons. For this reason, the Reusable Drain Guard is often used on construction sites.
Five hundred pounds is a lot of weight. Will the grate be able to hold the Drain Guard in place with that kind of load? This will be dependent from catch basin to catch basin depending on the design, weight, and size of the grate, the fit of the grate and other factors. However, it can and has been done. For added security, rebar can be inserted into the removal flap pockets and left in place (these will be necessary during removal of the Drain Guard).
What is the flow rate for this Drain Guard? When new, the flow rate for the Reusable Drain Guard is 695 gals/min/ft².
How am I supposed to remove the Reusable Drain Guard when it is full? Once rebar has been inserted into the removal flap pockets, the unit can either be removed by hand (at least two people) or, for larger loads, a backhoe, forklift or other equipment should be used.
Why doesn't this catch basin insert absorb oil and other hydrocarbons like your other Drain Guards? In order to be able to contain very large amounts of sand, silt, and sediment, it is necessary to use a polypropylene material to make the Reusable Model Drain Guard. While this is obviously a very strong, durable and heavy-duty material it does not have the oil-absorbing capabilities of the geotextile material that is used for most of our other Drain Guard models.
Regulations 40 CFR 122.26
Ultra-Drain Guard, Reusable
Call for Quote
No stock
Capture dirt and sediment at construction sites and other "High Erosion" areas with a rugged polypropylene guard which can be easily rinsed and reused
Drain-Net’s Ultra Drain Guard® removes sediment, pollutants, and other waste from storm water before it can become a problem in the water system. Made of rugged polypropylene, this model can be used multiple times. Ultra Drain Guard® helps you comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Storm Water Pollution Prevention Plans.
Rugged polypropylene construction can be easily rinsed and reused
Deep accumulation pocket (36") can hold up to 500 lbs. of soil, sand, sediment and dirt
Designed for easy removal with backhoe, forklift or other equipment
Custom sizes available
Compliance: Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDL requirements.
FAQ's:
Why would I choose the Reusable Drain Guard over another model? Because of its extraordinary capacity (up to 500 lbs), the Reusable Drain Guard is an excellent choice where the potential for sediment, sand, soil, and dirt is great and there is little or no concern for capturing hydrocarbons. For this reason, the Reusable Drain Guard is often used on construction sites.
Five hundred pounds is a lot of weight. Will the grate be able to hold the Drain Guard in place with that kind of load? This will be dependent from catch basin to catch basin depending on the design, weight, and size of the grate, the fit of the grate and other factors. However, it can and has been done. For added security, rebar can be inserted into the removal flap pockets and left in place (these will be necessary during removal of the Drain Guard).
What is the flow rate for this Drain Guard? When new, the flow rate for the Reusable Drain Guard is 695 gals/min/ft².
How am I supposed to remove the Reusable Drain Guard when it is full? Once rebar has been inserted into the removal flap pockets, the unit can either be removed by hand (at least two people) or, for larger loads, a backhoe, forklift or other equipment should be used.
Why doesn't this catch basin insert absorb oil and other hydrocarbons like your other Drain Guards? In order to be able to contain very large amounts of sand, silt, and sediment, it is necessary to use a polypropylene material to make the Reusable Model Drain Guard. While this is obviously a very strong, durable and heavy-duty material it does not have the oil-absorbing capabilities of the geotextile material that is used for most of our other Drain Guard models.
If your company has a corporate account, you can take a screenshot of your cart and email your order directly to us. Please be sure to include your shipping address.
Not sure what to order? Not sure what size you need?
Call for help: 908-236-0277
Prevent Plumbing problems with Drain-Net.com
Don't let your profits go down the drain!
Drain Net Technologies LLC PO Box 203, Stanton, New Jersey 08885
Need help? 908-236-0277 
