The only grease trap analyzer that is portable, fast, clean, and accurate.
Drain-Tech is proud to offer the first portable FOG probe designed to reliably and inexpensively measure the levels of FOG (fats, oil, and grease) in a grease interceptor. Based on measuring the electrical properties of the surrounding medium, there are no moving parts or expensive transducers. The result is a probe that can withstand the extreme physical and chemical environment of a grease interceptor. The AM-FOG probe consists of a chain of accurate sensors creating model lengths specific to operational needs/applications. Communicating via Bluetooth to an Android or iOS app, the AM-FOG enables complete control over the probe including: A bar graph showing depths of the FOG, water, and air layers
FOG percentage and Interceptor height
Temperature and battery life
A simple calibration of the probe in air and water
An easy to use diagnostic screen for troubleshooting
FEATURES
Accurately measures 1” levels of FOG, water, and air
Portable probe can be taken anywhere
Bluetooth (BLE) connection to phone or tablet App
Probe length optimized for your process
Robust design with no electrode corrosion and low maintenance
Each probe comes with a carrying case that doubles as a reservoir for water calibration.
An integrated squeegee cleans the probe with one swipe
BENEFITS
Measures levels of FOG, water, and air by truly sensing, not sampling
Results are generated rapidly, shortening the overall inspection time
Simplified yet reliable calibration process ensures peak performance
Digital level readings can saved with GPS and site information
Novel operation keeps you clean and probe cleans easily with wiper
INNOVATIVE MEASUREMENT
The AM-FOG probe consists of a chain of sensors creating model lengths specific to operational needs/applications. Communicating via Bluetooth to an Android or iOS app, the AM-FOG enables complete control over the probe including:
A bar graph showing depths of the FOG, water, and air layers
FOG percentage and Interceptor height
Temperature and battery life
A simple calibration of the probe in air and water
An easy to use diagnostic screen for troubleshooting
DESIGNED FOR THE MUNICIPAL INSPECTOR
No more dragging around core samplers that are time consuming, hard to read, messy and smelly. The Bluetooth connection and the user-friendly app allow the inspector to quickly, and cleanly, visit multiple sites in a day. Export data or screenshot function, simplifying integration into FOG management platforms. Applications include:
Grease interceptors
Oil-water separators
Lift Stations
What Model do I need?
The only difference in models is the length of the probe. For accurate measurements, the FOG Probe length needs to be greater than the distance from the bottom of the trap to the surface of the trap liquids. The length of the probe can be made to any multiple of 16 inches, up to 64 inches, so that it can be configured for any grease interceptor (except for the very largest gravity interceptors). The embedded firmware senses the correct length and customizes the user interface on the cell phone app for any probe. Most in-ground concrete or fiberglass tanks are usually no more than 4 feet tall. The most popular sizes are 32", 40", and 48". The other lengths are made to order and will typically ship within 3-4 weeks. Choose the length that is optimal for your measuring! Please note the probe should not be submerged any higher than the top of the sensing tube.
FOG Probe - A digital, portable device for monitoring Grease Interceptor Levels
The only grease trap analyzer that is portable, fast, clean, and accurate.
Drain-Tech is proud to offer the first portable FOG probe designed to reliably and inexpensively measure the levels of FOG (fats, oil, and grease) in a grease interceptor. Based on measuring the electrical properties of the surrounding medium, there are no moving parts or expensive transducers. The result is a probe that can withstand the extreme physical and chemical environment of a grease interceptor. The AM-FOG probe consists of a chain of accurate sensors creating model lengths specific to operational needs/applications. Communicating via Bluetooth to an Android or iOS app, the AM-FOG enables complete control over the probe including: A bar graph showing depths of the FOG, water, and air layers
FOG percentage and Interceptor height
Temperature and battery life
A simple calibration of the probe in air and water
An easy to use diagnostic screen for troubleshooting
FEATURES
Accurately measures 1” levels of FOG, water, and air
Portable probe can be taken anywhere
Bluetooth (BLE) connection to phone or tablet App
Probe length optimized for your process
Robust design with no electrode corrosion and low maintenance
Each probe comes with a carrying case that doubles as a reservoir for water calibration.
An integrated squeegee cleans the probe with one swipe
BENEFITS
Measures levels of FOG, water, and air by truly sensing, not sampling
Results are generated rapidly, shortening the overall inspection time
Simplified yet reliable calibration process ensures peak performance
Digital level readings can saved with GPS and site information
Novel operation keeps you clean and probe cleans easily with wiper
INNOVATIVE MEASUREMENT
The AM-FOG probe consists of a chain of sensors creating model lengths specific to operational needs/applications. Communicating via Bluetooth to an Android or iOS app, the AM-FOG enables complete control over the probe including:
A bar graph showing depths of the FOG, water, and air layers
FOG percentage and Interceptor height
Temperature and battery life
A simple calibration of the probe in air and water
An easy to use diagnostic screen for troubleshooting
DESIGNED FOR THE MUNICIPAL INSPECTOR
No more dragging around core samplers that are time consuming, hard to read, messy and smelly. The Bluetooth connection and the user-friendly app allow the inspector to quickly, and cleanly, visit multiple sites in a day. Export data or screenshot function, simplifying integration into FOG management platforms. Applications include:
Grease interceptors
Oil-water separators
Lift Stations
What Model do I need?
The only difference in models is the length of the probe. For accurate measurements, the FOG Probe length needs to be greater than the distance from the bottom of the trap to the surface of the trap liquids. The length of the probe can be made to any multiple of 16 inches, up to 64 inches, so that it can be configured for any grease interceptor (except for the very largest gravity interceptors). The embedded firmware senses the correct length and customizes the user interface on the cell phone app for any probe. Most in-ground concrete or fiberglass tanks are usually no more than 4 feet tall. The most popular sizes are 32", 40", and 48". The other lengths are made to order and will typically ship within 3-4 weeks. Choose the length that is optimal for your measuring! Please note the probe should not be submerged any higher than the top of the sensing tube.
FOG Probe - A digital, portable device for monitoring Grease Interceptor Levels
The only grease trap analyzer that is portable, fast, clean, and accurate.
Drain-Tech is proud to offer the first portable FOG probe designed to reliably and inexpensively measure the levels of FOG (fats, oil, and grease) in a grease interceptor. Based on measuring the electrical properties of the surrounding medium, there are no moving parts or expensive transducers. The result is a probe that can withstand the extreme physical and chemical environment of a grease interceptor. The AM-FOG probe consists of a chain of accurate sensors creating model lengths specific to operational needs/applications. Communicating via Bluetooth to an Android or iOS app, the AM-FOG enables complete control over the probe including: A bar graph showing depths of the FOG, water, and air layers
FOG percentage and Interceptor height
Temperature and battery life
A simple calibration of the probe in air and water
An easy to use diagnostic screen for troubleshooting
FEATURES
Accurately measures 1” levels of FOG, water, and air
Portable probe can be taken anywhere
Bluetooth (BLE) connection to phone or tablet App
Probe length optimized for your process
Robust design with no electrode corrosion and low maintenance
Each probe comes with a carrying case that doubles as a reservoir for water calibration.
An integrated squeegee cleans the probe with one swipe
BENEFITS
Measures levels of FOG, water, and air by truly sensing, not sampling
Results are generated rapidly, shortening the overall inspection time
Simplified yet reliable calibration process ensures peak performance
Digital level readings can saved with GPS and site information
Novel operation keeps you clean and probe cleans easily with wiper
INNOVATIVE MEASUREMENT
The AM-FOG probe consists of a chain of sensors creating model lengths specific to operational needs/applications. Communicating via Bluetooth to an Android or iOS app, the AM-FOG enables complete control over the probe including:
A bar graph showing depths of the FOG, water, and air layers
FOG percentage and Interceptor height
Temperature and battery life
A simple calibration of the probe in air and water
An easy to use diagnostic screen for troubleshooting
DESIGNED FOR THE MUNICIPAL INSPECTOR
No more dragging around core samplers that are time consuming, hard to read, messy and smelly. The Bluetooth connection and the user-friendly app allow the inspector to quickly, and cleanly, visit multiple sites in a day. Export data or screenshot function, simplifying integration into FOG management platforms. Applications include:
Grease interceptors
Oil-water separators
Lift Stations
What Model do I need?
The only difference in models is the length of the probe. For accurate measurements, the FOG Probe length needs to be greater than the distance from the bottom of the trap to the surface of the trap liquids. The length of the probe can be made to any multiple of 16 inches, up to 64 inches, so that it can be configured for any grease interceptor (except for the very largest gravity interceptors). The embedded firmware senses the correct length and customizes the user interface on the cell phone app for any probe. Most in-ground concrete or fiberglass tanks are usually no more than 4 feet tall. The most popular sizes are 32", 40", and 48". The other lengths are made to order and will typically ship within 3-4 weeks. Choose the length that is optimal for your measuring! Please note the probe should not be submerged any higher than the top of the sensing tube.
FOG Probe - A digital, portable device for monitoring Grease Interceptor Levels
The only grease trap analyzer that is portable, fast, clean, and accurate.
Drain-Tech is proud to offer the first portable FOG probe designed to reliably and inexpensively measure the levels of FOG (fats, oil, and grease) in a grease interceptor. Based on measuring the electrical properties of the surrounding medium, there are no moving parts or expensive transducers. The result is a probe that can withstand the extreme physical and chemical environment of a grease interceptor. The AM-FOG probe consists of a chain of accurate sensors creating model lengths specific to operational needs/applications. Communicating via Bluetooth to an Android or iOS app, the AM-FOG enables complete control over the probe including: A bar graph showing depths of the FOG, water, and air layers
FOG percentage and Interceptor height
Temperature and battery life
A simple calibration of the probe in air and water
An easy to use diagnostic screen for troubleshooting
FEATURES
Accurately measures 1” levels of FOG, water, and air
Portable probe can be taken anywhere
Bluetooth (BLE) connection to phone or tablet App
Probe length optimized for your process
Robust design with no electrode corrosion and low maintenance
Each probe comes with a carrying case that doubles as a reservoir for water calibration.
An integrated squeegee cleans the probe with one swipe
BENEFITS
Measures levels of FOG, water, and air by truly sensing, not sampling
Results are generated rapidly, shortening the overall inspection time
Simplified yet reliable calibration process ensures peak performance
Digital level readings can saved with GPS and site information
Novel operation keeps you clean and probe cleans easily with wiper
INNOVATIVE MEASUREMENT
The AM-FOG probe consists of a chain of sensors creating model lengths specific to operational needs/applications. Communicating via Bluetooth to an Android or iOS app, the AM-FOG enables complete control over the probe including:
A bar graph showing depths of the FOG, water, and air layers
FOG percentage and Interceptor height
Temperature and battery life
A simple calibration of the probe in air and water
An easy to use diagnostic screen for troubleshooting
DESIGNED FOR THE MUNICIPAL INSPECTOR
No more dragging around core samplers that are time consuming, hard to read, messy and smelly. The Bluetooth connection and the user-friendly app allow the inspector to quickly, and cleanly, visit multiple sites in a day. Export data or screenshot function, simplifying integration into FOG management platforms. Applications include:
Grease interceptors
Oil-water separators
Lift Stations
What Model do I need?
The only difference in models is the length of the probe. For accurate measurements, the FOG Probe length needs to be greater than the distance from the bottom of the trap to the surface of the trap liquids. The length of the probe can be made to any multiple of 16 inches, up to 64 inches, so that it can be configured for any grease interceptor (except for the very largest gravity interceptors). The embedded firmware senses the correct length and customizes the user interface on the cell phone app for any probe. Most in-ground concrete or fiberglass tanks are usually no more than 4 feet tall. The most popular sizes are 32", 40", and 48". The other lengths are made to order and will typically ship within 3-4 weeks. Choose the length that is optimal for your measuring! Please note the probe should not be submerged any higher than the top of the sensing tube.
FOG Probe - A digital, portable device for monitoring Grease Interceptor Levels
The only grease trap analyzer that is portable, fast, clean, and accurate.
Drain-Tech is proud to offer the first portable FOG probe designed to reliably and inexpensively measure the levels of FOG (fats, oil, and grease) in a grease interceptor. Based on measuring the electrical properties of the surrounding medium, there are no moving parts or expensive transducers. The result is a probe that can withstand the extreme physical and chemical environment of a grease interceptor. The AM-FOG probe consists of a chain of accurate sensors creating model lengths specific to operational needs/applications. Communicating via Bluetooth to an Android or iOS app, the AM-FOG enables complete control over the probe including: A bar graph showing depths of the FOG, water, and air layers
FOG percentage and Interceptor height
Temperature and battery life
A simple calibration of the probe in air and water
An easy to use diagnostic screen for troubleshooting
FEATURES
Accurately measures 1” levels of FOG, water, and air
Portable probe can be taken anywhere
Bluetooth (BLE) connection to phone or tablet App
Probe length optimized for your process
Robust design with no electrode corrosion and low maintenance
Each probe comes with a carrying case that doubles as a reservoir for water calibration.
An integrated squeegee cleans the probe with one swipe
BENEFITS
Measures levels of FOG, water, and air by truly sensing, not sampling
Results are generated rapidly, shortening the overall inspection time
Simplified yet reliable calibration process ensures peak performance
Digital level readings can saved with GPS and site information
Novel operation keeps you clean and probe cleans easily with wiper
INNOVATIVE MEASUREMENT
The AM-FOG probe consists of a chain of sensors creating model lengths specific to operational needs/applications. Communicating via Bluetooth to an Android or iOS app, the AM-FOG enables complete control over the probe including:
A bar graph showing depths of the FOG, water, and air layers
FOG percentage and Interceptor height
Temperature and battery life
A simple calibration of the probe in air and water
An easy to use diagnostic screen for troubleshooting
DESIGNED FOR THE MUNICIPAL INSPECTOR
No more dragging around core samplers that are time consuming, hard to read, messy and smelly. The Bluetooth connection and the user-friendly app allow the inspector to quickly, and cleanly, visit multiple sites in a day. Export data or screenshot function, simplifying integration into FOG management platforms. Applications include:
Grease interceptors
Oil-water separators
Lift Stations
What Model do I need?
The only difference in models is the length of the probe. For accurate measurements, the FOG Probe length needs to be greater than the distance from the bottom of the trap to the surface of the trap liquids. The length of the probe can be made to any multiple of 16 inches, up to 64 inches, so that it can be configured for any grease interceptor (except for the very largest gravity interceptors). The embedded firmware senses the correct length and customizes the user interface on the cell phone app for any probe. Most in-ground concrete or fiberglass tanks are usually no more than 4 feet tall. The most popular sizes are 32", 40", and 48". The other lengths are made to order and will typically ship within 3-4 weeks. Choose the length that is optimal for your measuring! Please note the probe should not be submerged any higher than the top of the sensing tube.
FOG Probe - A digital, portable device for monitoring Grease Interceptor Levels
The only grease trap analyzer that is portable, fast, clean, and accurate.
Drain-Tech is proud to offer the first portable FOG probe designed to reliably and inexpensively measure the levels of FOG (fats, oil, and grease) in a grease interceptor. Based on measuring the electrical properties of the surrounding medium, there are no moving parts or expensive transducers. The result is a probe that can withstand the extreme physical and chemical environment of a grease interceptor. The AM-FOG probe consists of a chain of accurate sensors creating model lengths specific to operational needs/applications. Communicating via Bluetooth to an Android or iOS app, the AM-FOG enables complete control over the probe including: A bar graph showing depths of the FOG, water, and air layers
FOG percentage and Interceptor height
Temperature and battery life
A simple calibration of the probe in air and water
An easy to use diagnostic screen for troubleshooting
FEATURES
Accurately measures 1” levels of FOG, water, and air
Portable probe can be taken anywhere
Bluetooth (BLE) connection to phone or tablet App
Probe length optimized for your process
Robust design with no electrode corrosion and low maintenance
Each probe comes with a carrying case that doubles as a reservoir for water calibration.
An integrated squeegee cleans the probe with one swipe
BENEFITS
Measures levels of FOG, water, and air by truly sensing, not sampling
Results are generated rapidly, shortening the overall inspection time
Simplified yet reliable calibration process ensures peak performance
Digital level readings can saved with GPS and site information
Novel operation keeps you clean and probe cleans easily with wiper
INNOVATIVE MEASUREMENT
The AM-FOG probe consists of a chain of sensors creating model lengths specific to operational needs/applications. Communicating via Bluetooth to an Android or iOS app, the AM-FOG enables complete control over the probe including:
A bar graph showing depths of the FOG, water, and air layers
FOG percentage and Interceptor height
Temperature and battery life
A simple calibration of the probe in air and water
An easy to use diagnostic screen for troubleshooting
DESIGNED FOR THE MUNICIPAL INSPECTOR
No more dragging around core samplers that are time consuming, hard to read, messy and smelly. The Bluetooth connection and the user-friendly app allow the inspector to quickly, and cleanly, visit multiple sites in a day. Export data or screenshot function, simplifying integration into FOG management platforms. Applications include:
Grease interceptors
Oil-water separators
Lift Stations
What Model do I need?
The only difference in models is the length of the probe. For accurate measurements, the FOG Probe length needs to be greater than the distance from the bottom of the trap to the surface of the trap liquids. The length of the probe can be made to any multiple of 16 inches, up to 64 inches, so that it can be configured for any grease interceptor (except for the very largest gravity interceptors). The embedded firmware senses the correct length and customizes the user interface on the cell phone app for any probe. Most in-ground concrete or fiberglass tanks are usually no more than 4 feet tall. The most popular sizes are 32", 40", and 48". The other lengths are made to order and will typically ship within 3-4 weeks. Choose the length that is optimal for your measuring! Please note the probe should not be submerged any higher than the top of the sensing tube.
FOG Probe - A digital, portable device for monitoring Grease Interceptor Levels
The only grease trap analyzer that is portable, fast, clean, and accurate.
Drain-Tech is proud to offer the first portable FOG probe designed to reliably and inexpensively measure the levels of FOG (fats, oil, and grease) in a grease interceptor. Based on measuring the electrical properties of the surrounding medium, there are no moving parts or expensive transducers. The result is a probe that can withstand the extreme physical and chemical environment of a grease interceptor. The AM-FOG probe consists of a chain of accurate sensors creating model lengths specific to operational needs/applications. Communicating via Bluetooth to an Android or iOS app, the AM-FOG enables complete control over the probe including: A bar graph showing depths of the FOG, water, and air layers
FOG percentage and Interceptor height
Temperature and battery life
A simple calibration of the probe in air and water
An easy to use diagnostic screen for troubleshooting
FEATURES
Accurately measures 1” levels of FOG, water, and air
Portable probe can be taken anywhere
Bluetooth (BLE) connection to phone or tablet App
Probe length optimized for your process
Robust design with no electrode corrosion and low maintenance
Each probe comes with a carrying case that doubles as a reservoir for water calibration.
An integrated squeegee cleans the probe with one swipe
BENEFITS
Measures levels of FOG, water, and air by truly sensing, not sampling
Results are generated rapidly, shortening the overall inspection time
Simplified yet reliable calibration process ensures peak performance
Digital level readings can saved with GPS and site information
Novel operation keeps you clean and probe cleans easily with wiper
INNOVATIVE MEASUREMENT
The AM-FOG probe consists of a chain of sensors creating model lengths specific to operational needs/applications. Communicating via Bluetooth to an Android or iOS app, the AM-FOG enables complete control over the probe including:
A bar graph showing depths of the FOG, water, and air layers
FOG percentage and Interceptor height
Temperature and battery life
A simple calibration of the probe in air and water
An easy to use diagnostic screen for troubleshooting
DESIGNED FOR THE MUNICIPAL INSPECTOR
No more dragging around core samplers that are time consuming, hard to read, messy and smelly. The Bluetooth connection and the user-friendly app allow the inspector to quickly, and cleanly, visit multiple sites in a day. Export data or screenshot function, simplifying integration into FOG management platforms. Applications include:
Grease interceptors
Oil-water separators
Lift Stations
What Model do I need?
The only difference in models is the length of the probe. For accurate measurements, the FOG Probe length needs to be greater than the distance from the bottom of the trap to the surface of the trap liquids. The length of the probe can be made to any multiple of 16 inches, up to 64 inches, so that it can be configured for any grease interceptor (except for the very largest gravity interceptors). The embedded firmware senses the correct length and customizes the user interface on the cell phone app for any probe. Most in-ground concrete or fiberglass tanks are usually no more than 4 feet tall. The most popular sizes are 32", 40", and 48". The other lengths are made to order and will typically ship within 3-4 weeks. Choose the length that is optimal for your measuring! Please note the probe should not be submerged any higher than the top of the sensing tube.
If your company has a corporate account, you can take a screenshot of your cart and email your order directly to us. Please be sure to include your shipping address.
Not sure what to order? Not sure what size you need?
Call for help: 908-236-0277
Prevent Plumbing problems with Drain-Net.com
Don't let your profits go down the drain!
Drain Net Technologies LLC PO Box 203, Stanton, New Jersey 08885
Need help? 908-236-0277 
